PRODUCTS BY TYPE

Home > Accessories > Crescent Accessories


Crescent Accessories


Switches


Crescent Accessories
Crescent Accessories

Switches

Utilizes 120V only. Suffix catalog number with option code H2 (2-way pull switch), H1 (4-way pull switch) or H4 (turn switch).

View full details



Pre-Wired Plug-Ins


Crescent Accessories
Crescent Accessories

Pre-Wired Plug-Ins

The PLS model features option code F3 for a single circuit plug-in. For double circuits, use either PLR or PLB plug-ins with option code F4/F6. PLR ballasts are “hot'' wired to the red lead and PLB to the black lead.

View full details



Stem & Canopy


Crescent Accessories
Crescent Accessories

Stem & Canopy

The canopy is catalog no. SSC and a single 3/8 IPS stem is catalog no. XXSTEM. The “XX'' = Length (i.e., 24Stem for 24'').

View full details



Radio Interference Suppressor


Crescent Accessories
Crescent Accessories

Radio Interference Suppressor

Suffix catalog number with option code D1.

View full details



Emergency Lighting Systems


Crescent Accessories
Crescent Accessories

Emergency Lighting Systems

Suffix catalog number with option code B0, B1, B2, B3, B4, B5 (see option list for individual descriptions).

View full details



Sleeve Coupler


Crescent Accessories
Crescent Accessories

Sleeve Coupler

Catalog No. 50060 is used with SCN, RH, TEN and RT series, while catalog no. 75600 is part of the SCF or RN series. Heavy-duty 10'' sleeve coupler for use with 4-1/4'' wide open channels and industrial fixtures.

View full details



4' Wire Guards


Crescent Accessories
Crescent Accessories

4' Wire Guards

FORMED (with reflector): Catalog No. TRG-4 used with RT series, while NRG-4 works in conjunction with the RN or RH series. FLAT: The RT “flat'' series utilizes the FWG-5 wire guard or catalog no. FWG-4 for use with the RN and RH series. FORMED (without reflector): There are three choices for this type of wire guard: Catalog No. SCG-4 for use with the SCF and SCN series; Catalog No. TEG-4 for the TEN series or Catalog No. CHG-4 with the C series.

View full details



FS Boxes (Single & Double Gang)


Crescent Accessories
Crescent Accessories

FS Boxes (Single & Double Gang)

FS Boxes are designed to accept a variety of standard electrical equipment including photocontrols, switches, receptacles, and lighting fixtures. Can be surface-mounted or used at ground level for accent/landscape lighting. Also ideal for splicing and end of runs. Heavy-duty, die-cast aluminum finished in silver or white Duraplex II polyester powder. All holes are tapped 1/2'' or 3/4'' NPS. Zinc close-up plugs are included with each box (1 less than the number of holes/box), as well as pre-installed ground screws. All FS boxes are equipped with two stainless steel, slide-out mounting lugs for installation to any surface: wood, cement or brick.

View full details



Symmetric & Asymmetric Reflectors


Crescent Accessories
Crescent Accessories

Symmetric & Asymmetric Reflectors

Available in varying dimensions (see catalog page).

View full details